Special Price

OVERSTOCK AND CLEARANCE

MSD 25C

MSD 25C

Quantity Available: 30
Condition: NEW!
CLEARANCE PRICE: $150/each (Valued at $230)

General Specifications(click here)
Input Voltage +12 to 48 Vdc
Phase output current 0.4 to 3 Amps (RMS), 4 Amps (Peak)
Output current setting Via and external resistor
Idle current reduction setting Via an external resistor
Idle current reduction Automatic after 1 sec after the last step input
Isolated inputs STEP, DIRECTION, ENABLE and RESET
Max. STEP frequency input 10 MHz
Step per revolution
1.8 -two phase step motor
400, 800, 1000, 1600, 2000, 3200, 5000, 6400,10000, 12800, 25000, 25600, 50000, and 51200
Protection Phase to Phase, Phase to ground, Phase to voltage and Thermal
Switching frequency (PWM) 20 kHz
Minimum load inductance NONE
Operating temperature 0 to 50 C providing the case will not exceed 70 C
Storage temperature -40 to +125 C
Maximum case temperature +70 C
Relative humidity range 10 to 90 %, non-condensing
Power Connectors Screw terminal
Signal Connector Screw terminal
Size 2.75" x 3.06" x 1.20"
Weight 0.25 lb
PMAC2

PMAC2 PCI- Lite 400-603658

Base version without options provides 1-slot board with:

  • 40 MHz DSP563xx CPU
  • 128k x 24 internal zero-wait-state SRAM.
  • 512k x 8 flash memory for user backup & firmware.
  • Latest released firmware version.
  • RS-232/432 serial interface, 33 MHz PCI bus interface
  • 4 channels axis interface circuitry, each including:
    • 3 output command signal sets, configurable as either:
    • 2 serial data streams to external DACs 1 pulse-&-direction.
    • 3 PWM top-and-bottom pairs.
    • 3-channel (AB quad with index) differential/single-ended encoder input.
  • 9 input flags, 2 output flags.
  • Interface to 2 external serial ADCs, 8 to 18 bits.
  • 2 channels supplemental interface circuitry, each including:
    • 2-channel (AB quad with index) differential/single-ended encoder input
    • 1 output command signal set, configurable as pulse-&- direction or PWM top-and-bottom pair.
  • Display, MACRO, muxed I/O, direct I/O interface ports.
  • Buffered expansion port. Clock crystal with +/-100 ppm accuracy.
  • PID/notch/feedforward servo algorithms.
  • 1-year warranty from date of shipment.
  • One CD-ROM per set of 1 to 4 PMACs in shipment.
(Cables, mounting plates, mating connectors not included)

Quantity: 1
CLEARANCE PRICE: $1,200
Condition: slightly used

PMAC

PMAC2 PCI 400-603367

Base version without options provides 1-1/2-slot board with:

  • 40 MHz DSP563xx CPU (Option 5AF)
  • 128k x 24 internal zero-wait-state SRAM
  • Latest released firmware version.
  • RS-232 serial interface, 33 MHz PCI bus interface
  • 4 channels axis interface circuitry, each including:
    • 3 output command signal sets, configurable as either:
      • 2 serial data streams to external DACs, 1 pulse-&-direction
      • 3 PWM top-and-bottom pairs
    • 3-channel (AB quad with index) differential/single-ended encoder input
    • 9 input flags, 2 output flags
    • Interface to 2 external serial ADCs, 8 to 18 bits
  • 2 channels supplemental interface circuitry, each including:
  • 2-channel (AB quad)differential/single-ended encoder input
  • 1 output command signal set configurable as pulse-and- direction or PWM top-and-bottom pair
  • Display, muxed I/O, direct I/O interface ports
  • Buffered expansion port
  • Clock crystal with +/-100 ppm accuracy
  • PID/notch/feedforward servo algorithms
  • 1-year warranty from date of shipment
  • One CD-ROM per set of 1 to 4 PMACs in shipment.

(Cables, mounting plates, mating connectors not included)

Quantity: 3
CLEARANCE PRICE: $1,500
Condition: slightly used

PMAC PCI, with Option 16

Base version without options provides 1-1/2-slot board with:

  • 40 MHz DSP563xx CPU (Option 5AF)
  • 128Kx24 internal zero wait-state SRAM
  • Flash memory backup
  • Latest released firmware version.
  • RS-232/422 serial interface, 33 MHz PCI bus interface
  • 4 channels axis interface circuitry, each including
    • 16-bit +/-10V analog output
    • 3-channel (AB quad with index) differential/single-ended encoder input
    • 4 input flags, 2 output flags
    • Interface to external 16-bit serial ADC
  • Display, control panel, muxed I/O, direct I/O interface ports
  • Buffered expansion port
  • Clock crystal with +/-100 ppm accuracy
  • PID/notch/feedforward servo algorithms
  • 1-year warranty from date of shipment
  • One CD-ROM per set of 1 to 4 PMACs in shipment

(Cables, mounting plates, mating connectors not included)

Option 16:
16K x 24 battery-backed parameter RAM

Quantity: 1
Condition: NEW!
CLEARANCE PRICE: $2,000 (Valued at $3,300)

No image available

 

TURBO PMAC2 PCI Ultra, with options A,1U1, 8A, 2

Base version without provides 1-slot board with:

  • Latest released firmware version (Specific Firmware version optional)
  • RS-232/422 serial interface, 33 MHz PCI bus interface
  • MACRO-ring fiber optic interface connector
  • MACRO network interface for 8 axes (up to 32 axes optional)
  • (No on-board axis interface circuitry)
  • 2 channels supplemental interface circuitry, each including:
    • 2-channel (AB quad) differential/single-ended encoder input
    • 1 output command signal set, configurable as pulse-&-direction or PWM top-and-bottom pair
  • Display, MACRO, muxed I/O, direct I/O interface ports
  • PID/notch/feedforward servo algorithms
  • Extended "pole-placement" servo algorithms
  • Electronic board identification number module
  • 1-year warranty from date of shipment
  • One CD-ROM per set of 1 to 4 PMACs in shipment
(Cables, mounting plates, mating connectors not included)

Opt-A:
MACRO-ring fiber optic interface connector (Included in base unit price)

Opt-1B:
32 MACRO Interface nodes 16 servo, 12 I/O & 4 communication nodes
(Opt -1B is equivalent to legacy Opt-1U1)

Opt-2B:
On-board 32Kx16 Dual Ported RAM

Quantity Available: 1
Condition: slightly used
CLEARANCE PRICE: $1500

No image available

 

ACC 8S with options 1 & 2

ACC-8S PMAC2 2-axis stepper-motor breakout board 3A0-602644-10X
ACC-8S-OPT-1 Option 1 - Terminal block encoder interface 301-0ACC8S-OPT
ACC-8S-OPT-2 Option 2 - Rail mount 302-0ACC8S-OPT

Quantity Available: 15
Condition: Slightly used
CLEARANCE PRICE: $115

No image available

 

Acc 14E

48 bits of High-Speed Inputs/Outputs, TTL discrete digital I/O points at 5V levels. Software configurable for Inputs or Outputs. This board is typically used for laser inferometers, parallel-word absolute feedback, or external opto modules. Two 50-pin IDC headers are used for I/O wiring.

Backplane Data Slots Needed = 1
Rack Slots = 1

Quantity Available: 1
Condition: NEW!
CLEARANCE PRICE: $250

No image available

 

Acc 36E

12 bit A/D BOARD
16-Channel 12-Bit A/D Converter Board Can be used for servo feedback, or general purpose analog input, 0-10V, +/- 5V, or +/- 10V input range. This product is available with Removable Terminal Blocks (RTB) or DB15 connector interface. To order with this options please note Part Number change below.
Sample rate up to 96KHz reading all 16 channels
Backplane Data Slots Needed = 1
Rack Slots = 1

Quantity Available: 1
Condition: NEW!
CLEARANCE PRICE: $500

No image available

 

Acc 67E

Isolated, Self-Protected, Sourcing 48-Output Board. 48 optically isolated self-protected sourcing outputs at up to 24VDC, 600mA each U-BUS Back-plane required. This product is available with Removable Terminal Blocks (RTB) or DB15 connector interface. To order with this options please note Part Number change below.
Backplane Data Slots Needed = 1
Rack Slots =1

Quantity Available: 1
Condition: NEW!
CLEARANCE PRICE: $350

ID33002

ID33002

Quantity Available: 2
Condition: NEW!
CLEARANCE PRICE: $135

IS34025

IS34025

Quantity Available: 3
Condition: NEW!
CLEARANCE PRICE: $85